Complete portable wireless intercom system for professional communication between up to 6 users. Ideal for broadcast, theatre and live event productions.
The Williams AV DW SYS2ACM is a complete, portable, and wireless intercom system designed for professional communication among up to six users, ideal for broadcast, theater, and live-event productions. This system facilitates clear, two-way communication, eliminating the need for a traditional base station and prioritizing mobility and flexibility. Users can move freely while maintaining seamless contact within their team.
A defining feature of the DW SYS2ACM is its Flexible Access Point, allowing any of the six devices to function as the central communication hub, maximizing range and adaptability. It supports the creation of up to four subgroups, enabling targeted communication among specific teams like lighting, camera, or stage crew. Additionally, it offers features such as customized subgroup naming, quick subgroup switching, and an All Call function for broadcasting announcements to all six users, enhancing efficiency and coordination in dynamic, fast-paced environments.
CODE: DW SYS2ACM-01
System Includes:
- 6 × DLT 400-ACM – Digi-Wave ACM transceivers
- 6 × MIC 157 – Single-Muff headset with microphone and TRRS plug
- 6 × CCS 063 BK – Protective carry cases
- 1 × CHG 412 – 12-bay charger with power supply
- 1 × CCS 042 DW – Carry case
Features
- Fully Mobile, No Base Station – Fully portable, full-duplex two-way communication system with no base station required.
- Flexible Access Point – Any unit can act as the system access point (Main Sync), maximizing coverage and communication range.
- All Call Function – Allows one or more leaders to communicate with all subgroups simultaneously.
- Four (4) Subgroups – Supports 2–4 configurable subgroups for flexible team communication.
- Customized Subgroup Naming – Create custom subgroup names (up to 6 characters) or use predefined names such as Camera, Audio or Stage.
- Quick, Seamless Subgroup Switching – Leaders can instantly switch between subgroups for efficient coordination.
- Control Function – Configure and update system settings offline using a Digi-Wave ACM transmitter.
- Affordable Intercom – Professional intercom features with clear audio at a cost-effective price.
- All Day Battery Life – Up to 16 hours of operation on a single charge.
- Private Line Functionality – Designated units can establish private communication with the lead unit.
DLT 400-ACM
- Dimensions: 2.60”W x 4.22”H x 0.50”D (66 mm x 107.3 mm x 12.6 mm)
- Weight: 3.3 oz (94 g) including battery
- Color: Black/Silver (Front/Back)
- Case Material: Black ABS plastic
- Battery type: Lithium Polymer with smart charge built into transceiver; 1800 mAH
- Battery life: Up to 16 hrs talk time per charge @ 1ch Tx and 1ch Rx
- Power Save: Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
- Charge time: 5 hrs. approx.
- System Voltages: OLED 14VDC; RF 5VDC; Logic 3.3 VDC
- Operating frequencies: 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
-
Audio Frequency response (-3dB Level):
- INT24, Q&A INTP, ADV. Comms, Intercom and Court Mode: 100 - 7,200 Hz
- Other Modes: 100 - 11,500 Hz
- SNR: 73 dB (A-weighted, default Rx volume with mic input)
- THD: 0.1 % (Default Volume, 1kHz)
- Microphone input: Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (sleeve) with electret microphone bias, adjustable gain with 63dB range.
- Line Input: USB-C, Adjustable level
- Headphone Output: 3.5 mm TRRS headphone jack; 25 mW, R 32 ohms
- Audio Output: Headphone: Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041) Line: USB-C, Adjustable level
- Range: Up to 900 ft (274 m) (depending upon environmental conditions)
- Modulation: FSK
- RF Output: 19 dBm Typical
- Security: 87-bit encryption (300 Series Compatible), 87+128 bit Encryption, Encryption PIN, Lock for settings
- Side tone: -6 dB below volume, tone variation (Off, Low and High settings available)
- Indicators: OLED
- LEDs: Red LED around Talk button when enabled; Bi-color, changing green and red LED at top
- Charging Connectors: USB-C; Two contacts for use with CHG 412
- Compatible Receiver: DLR 400 RCH (with firmware 1.3.0 or greater)
- Operating Temperature Range: 14º to 113ºF (-10º to 45ºC)
- Approvals: FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki
- Warranty: 2-years warranty against component failure and manufacturing defects. 1 year on the internal battery. See Full Warranty on the website for details.
CHG 412
- Dimensions: 9"L x 7"W x 1.5"H (23 cm L x 17.8 cm W x 3.8 cm H)
- Weight: 1.8 lbs (845 g)
- Enclosure: Black, ABS plastic with metal base
- Power Supply Input: TFP 066, 90-240 VAC input, 1.5 A max *
- Power Supply: Universal DC adapter, 5 VDC - 6A output, center positive
- Output Rating: 5 VDC, 0.5 A per bay (12 charging bays)
- Charging Time: ~5 hours
- Unit Capacity: 12 Units
- Compatible Units: Transceiver: DLT 400 Receiver: DLR 400 RCH
- Indicators: Charge status indicators on DLT or DLR
- Approvals: CE, FCC, WEEE, RoHS, CB
- Warranty: 2-year (cables and power supply warranty for 90 days)
* Eight separate CHG 412s (each powered by their own TFP 066 power supply) can be connected to a 15-amp circuit.