Williams AV IR+ Secure - IR SY12 Infrared System

Gallery
Description

Description

Fully equipped IR+ infrared system for large areas with Dante, 2 emitters, 4 receivers, headphones, and charging equipment.

IR SY11 D is a complete IR+ solution for larger venues. The system is built around the IR M1 D Modulator/Control Center with 2-channel Dante input and Wi-Fi audio server. It includes two IR emitters, four 4-channel receivers, headphones, neckloops, charging equipment, and mounting accessories.

System Includes

1 × IR M1 D – Rack-Mount IR+ Infrared Modulator/Control Center and Wi-Fi Audio Server with 2-channel Dante input
2 × IR E4 – Wall-Mounted IR+ Infrared Emitters
4 × WIR RX22-4N – 4-Channel Infrared Receivers with Lanyards
2 × CHG 3502 – 2-Bay Body-Pack Chargers
4 × BAT 026-2 – Pairs of Rechargeable AA NiMH Batteries
4 × HED 021 – Folding Mono Headphones
2 × NKL 001 – Neckloops for T-coil Hearing Aids
1 × MLB 003 – Metal Linking Bar for Dual IR E4 Emitters
2 × BKT 024 – Wall-Mount Brackets for Emitters
1 × IDP 008 – ADA Accessibility Sign

IR M1 D Infrared Modulator / Control Center with Dante

Dimensions (W × H × D): 19″ × 1.75″ × 8.2″ (48.3 × 4.5 × 20.8 cm)
Weight: 5.2 lb (2.4 kg)
Color: Black
Rack Mount: 1U
Power Supply: International desktop supply; input: 36 W, 110–240 VAC, 50–60 Hz; output: +48 VDC, 0.75 A, center-positive
Power Switch: Rocker switch with LED
Signal-to-Noise Ratio: 67 dB (typical)
Modulation: FM wideband, +50 kHz deviation, 50 μs pre-emphasis
Carrier Frequencies: Selectable – 2.3/2.8 MHz or 3.3/3.8 MHz
Frequency Response: 40 Hz–16 kHz, +1/−3 dB, electrical response
Total Harmonic Distortion: Less than 2%, electrical response
Audio Processor Functions: DSP-based; compression 1:1, 1.5:1, or 2:1; high-pass and low-pass filter frequency control
Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present; adjustable through web interface
Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing
Audio Inputs: 2 × combination 3-pin XLR / 1/4″ TRS inputs for balanced or unbalanced line-level audio, or balanced or unbalanced microphone signals with selectable phantom power
Dante: 2-channel Dante audio input
Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
Remote Configuration: Available through embedded web interface
Headphone Outputs: 2 × 1/4″ headphone jacks on front panel for monitoring Ch A and Ch B audio inputs
Emitter Outputs: 4 × RJ45 ports for CAT5e cables; provide +48 VDC power, RS-485 communication, and Baseband signals for IR transmission
Operating Requirements: 0–50 °C ambient temperature; non-condensing, non-corrosive atmosphere
Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty: 2 years on modulator; 90 days on accessories

IR E4 Infrared Emitter

Dimensions (W × H × D): 7.5″ × 1.4″ × 3.6″ (19.1 × 3.6 × 9.1 cm)
Weight: 0.8 lb (362 g)
Color: Black
Power: 48 VDC supplied by IR M1 D via CAT5e cable
Coverage Area: Up to 18,000 sq ft (≈1,672 m²) in single-channel mode
Connectivity: +48 VDC power, RS-485 communication, and Baseband signals for IR transmission are provided via a single CAT5e cable with RJ45 connection from the IR M1 D
Operating Requirements: 0–50 °C ambient temperature; non-condensing, non-corrosive atmosphere
Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty: 2 years on emitter; 90 days on accessories

WIR RX22-4N Infrared Receiver

Receiver Style: Body-Pack with dual-lens IR detector and lanyard
Dimensions (L × W × H): 4.1″ × 2.85″ × 1.2″ (104.1 × 72.4 × 30.4 mm)
Weight: 4.5 oz (127 g) with batteries
Color: Black
Lanyard: 3 ft (0.91 m); allows receiver to be worn around the neck
Operating Temperature: −10 to +50 °C
Battery Type: 2 × AA alkaline (BAT 001-2) or NiMH (BAT 026-2)
Battery Life: Up to 60 hours alkaline; up to 30 hours per NiMH charge
Battery Drain: 25 mA nominal
Charging Contacts: For use with CHG 3512
Carrier Frequencies: Ch 1 – 2.3 MHz; Ch 2 – 2.8 MHz; Ch 3 – 3.3 MHz; Ch 4 – 3.8 MHz
De-Emphasis: 50 μs
FM Deviation: ±50 kHz
Signal-to-Noise Ratio: ≥60 dB
Squelch: Receiver mutes at 28 dB S/N ratio
Frequency Response: 25 Hz–16 kHz, +1/−3 dB, electrical response
Total Harmonic Distortion: Less than 1%, electrical response
Controls: Combined ON/OFF/volume thumbwheel control; four-position rotary channel selector
Indicator: Red LED ON indicator; flashes to indicate low battery
Audio Output: 3.5 mm stereo mini phone jack; accepts 3.5 mm mono or stereo plug
Audio Output Power: 15 mW max at 32 Ω
Acoustic Output: 125 dB SSPL90 with HED 021; 110 dB SSPL90 with EAR 013
Sensitivity: Better than 1 nW/cm² for 40 dB signal-to-noise ratio
Compatible Headphones/Earphones: Mono or stereo, 8–32 Ω, 3.5 mm plug; HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001
Approvals: CE, FCC, RoHS, WEEE
Warranty: 5 years on receiver; 90 days on accessories

CHG 3502 2-Bay Body-Pack Charger

Dimensions (L × W × H): 4⅞″ × 3⅞″ × 2″ (12.4 × 9.8 × 5.1 cm)
Shipping Weight: 1.1 lb (0.5 kg)
Enclosure: Black ABS plastic
Power Input: 6 VDC, 300 mA, center-positive
Charging Output: 100 mA per bay
Power Supply: Williams Sound TFP 041 (US); input: 100–240 VAC, 50–60 Hz, 0.5–0.3 A; output: 6 VDC, 1.5 A
Charging Time: 16 hours nominal
Unit Capacity: 2 units
Indicators: 2 red LEDs, one per bay; LEDs are lit while charging
Warranty: 2 years
Approvals: CE, FCC, RoHS